Gallery

» Gallery

Oświęcim – Warehousing and production building with an overhead crane

Małopolskie province

Steel construction suitable for an overhead crane
Building parameters:

  • length: 80.00m
  • width: 25.07m
  • apex height: 13.93m
  • clear height: 11.56m
  • clearance under hook: 10m
  • overhead crane lift capacity: Q=20t
  • axial span: 23.3m

Steel framework structure hall. Wall and roof cladding in the form of light composite panels with a 10 cm thick polyurethane foam core . Industrial flooring with scattered reinforcement and surface hardening. Two sectional gates located in the front section of the building. The front section of the unit comprises a ground floor amenities building constructed in traditional masonry technology. Overhead crane beams have been designed and performed using an innovative technology by Konspekt allowing for a significant reduction in their weight and subsequently the costs.

Jaworzno– Light warehousing and production building
Śląskie province
Building parameters:

  • length: 48m
  • width: 20m
  • clear height 6m (up to the bottom truss edge)

Cladding in the form of composite panels with a 10 cm thick polyurethane foam core . A very characteristic element of this hall is the very long belt of ridge skylight light, reaching almost every corner of the interior. This hall is based on the 20m LIGHT system which comprises light structures for cheap halls where the price to floor area proportion has to be as low as possible [PLN/m2 of usable floor area]. The present unit is our showpiece “thousander” (a building with a 1000 sq. m. usable floor area) with the main use designation a s a warehousing unit. Due to the sue of ridge skylights and window joinery it complies with the lighting requirements allowing constant work. In the head and side wall there are sectional gates allowing free movement of vehicles.

Żory– Light garage – warehousing building with a sheltered area
Śląskie province
Building parameters:

  • width: 20m
  • building length: 30m
  • sheltered area length: 12m
  • clear height 6m (up to the bottom truss edge)

Cladding using coated T55 trapezoidal sheet metal. The unit is equipped with a sectional gate. Its primary use is a garage for agricultural vehicles and machines as storage of farm materials. This unit is an excellent combination of the lightest and cheapest truss solutions fully ensuring the safety of the building (full lead bearing with respect to snow and wind loading). The hall uses tailor made LIGHT system solutions developed by Konspekt. This is one of the cheapest structural systems available on the market with an insurance of a fully functional building. This solution is right for all those looking for the largest possible usable floor area at a minimal investment expenditure. The building is based on the LIGHT 20m light steel buildings system.

Modlnica near Kraków– Warehousing and production building
Małopolskie province
Building parameters:

  • width: 20m
  • length: 48m
  • clear height 6m (up to the bottom truss edge)

Cladding in the form of composite panels with a 10 cm thick polyurethane foam core . The building has 3 sectional gates (one in the head wall and two in the front wall). Excellent lighting is provided by skylights are located along the ridge line. The rear part of the unit comprises an office and amenities building built using traditional masonry technology. This unit was designed and made subject to the highest standards connected both with use and visual aspects. An exceptionally representative facade of the unit comprises decoration for the entire investment.

Katowice– Workshop with an overhead crane

workshop with an overhead crane
Śląskie province

Building parameters:

  • length: 25m
  • width: 13.2m
  • length: 25m
  • clear height 6.4m (up to the bottom truss edge)
  • width in overhead crane axes 12m
  • overhead crane lift capacity Q=12.5t
  • clearance under hook h=5m

One of the smaller designed and manufactured overhead crane units. The unit was manufactured and equipped with an overhead crane for the needs of a specialist car repair garage and a vehicle service facility. It was particularly challenging or our design office to draw up the technical design taking into consideration the possibility of large deformations occurring caused by mining activity. The unit is equipped with sectional gates and a windows joinery strip. One of the head walls is flush with a brick office and amenities building. Silver composite panels constitute light cladding for the unit.

Katowice– Production building with an office and amenities section

Śląskie province
Building parameters:

  • length: 30m
  • width: 20m (hall and amenities)
  • amenities building length: 7m
  • clear height 3m (up to the bottom truss edge)

This unit was manufactured with the intended use as a low rise production hall for small electronic elements. It’s clear height (up to the lower truss edge) is just 3m, but sufficient for unobstructed work. This example shows that it is possible to build a fully usable production hall compliant with strict process requirements at a low cost. One of the head walls is flush with a brick office and amenities building. Its structure and colour scheme are cohesive with the cladding and geometry of the hall making the unit into uniform structure.